Skip to Main Content »

Questions? Email Us or call (888) 263-7028 (Hours: M-F 8am - 5pm Central)

Site Navigation:

November 3, 2009

Motorcycle Cover Size | How To Measure A Motorcycle

Choosing the right size motorcycle cover is important if you want to fully protect your bike from the elements. Follow these steps to make sure the cover you buy is the right size for your bike.

  1. Check the Motorcycle Cover Sizing Chart

    The bottom of the motorcycle cover should reach within a few inches of the ground.

    The bottom of the motorcycle cover should reach within a few inches of the ground.

    Use the motorcycle cover sizing chart as a beginning point to determine which size cover you need. Remember that the suggestions on the sizing chart are just that—suggestions. Even when a cover sizing chart is available, it’s a good idea to double check the dimensions of your bike before purchasing a motorcycle cover.

    a

    Aftermarket accessories and modifications can change the dimensions more than you realize. If your bike has saddle bags, fairings, a backrest, sissy bar and/or a windshield, you will most likely need a larger cover. Make sure you get a motorcycle cover with the right fit to provide the best protection possible.

  2. Measure Your Motorcycle

    The cover length, width, and height are stated on the product page for all DuraShield motorcycle covers. For example, the DuraShield Lined Motorcycle Cover in X-Large is 104″ long x 41″ wide x 49″ high. Make sure your bike does not exceed these dimensions, or the cover will be too snug.

  3. Err on the Larger Side

    Your motorcycle size may not meet the exact dimensions stated for the cover. If not, just make sure you choose a cover that is slightly larger than your motorcycle (rather than slightly smaller). It’s better to choose a cover that’s a little on the baggy side (but still fits) than a cover that’s too small to cover your bike properly. If you’re afraid the cover might blow away, you can always secure the cover using the integrated grommets.

  4. Get the Right Fit

    The bottom of the motorcycle cover should reach within a few inches of the ground. It does not need to touch the ground to fully protect your motorcycle. The extra few inches of clearance will promote air flow underneath the cover.

    If you’re still not sure which size cover is right for you or if you have a custom bike, don’t hesitate to call the customer service line to find the right motorcycle cover for your needs.