A quality golf cart cover reduces spring maintenance.

A quality golf cart storage cover should protect the entire cart from top to bottom. It should be properly vented to allow moisture and condensation to evaporate. If moisture is allowed to build up under the cover, the cover can do more damage than good by holding moisture in, where it will eventually damage your golf cart. With an effective venting system, however, the moisture has a chance to escape before causing any damage.

A quality golf cart cover should be water repellent to protect against rain, snow, and other weather damage. It should also include a UV protectant coating to keep the sun’s harsh rays from breaking down the cover’s fibers.

With the right golf cart cover, you should never have to worry about cleaning or drying out your golf cart after long-term storage. Just perform the regular spring maintenance, and you’re on your way!

Before storing your cover for the season, we recommend cleaning it. Brush off any loose dirt and debris, and follow the cleaning instructions supplied by the manufacturer. After the cover is dry, fold it neatly and place it in the storage bag, if included.

Make sure the cover is completely dry before folding it. Any moisture trapped inside the cover during storage can promote the growth of mildew.

Store the cover in a dry, protected area away from sunlight. This will help your cover last longer and save you the expense of buying a new one.

Type of Fabric

Boat cover made with marine-grade polyester fabric

1. Poly/Cotton Blend

The cheapest boat covers are made from a poly/cotton blend. This fabric breaks down faster and doesn’t protect the boat as well as other types of fabric. Covers made from a poly/cotton blend are typically only under warranty for a year and are only suitable for mild climates and minimal use.

2. Marine-Grade Polyester

Marine-grade polyester is a much more durable fabric than poly/cotton blend. These boat covers are slightly more expensive, but the durability is well worth the cost. Polyester boat covers offer an ideal balance of strong protection and cost effectiveness. They resist wear and tear and mildew growth much better than poly/cotton covers.

3. Acrylic

Acrylic boat covers are high end covers that offer superior protection; however, they are also more expensive to produce, which means that their cost is much higher than for other types of fabric.

Fabric Weight and Weave

In most cases, the heavier the fabric, the more durable it will be. However, durability is also affected by the tightness of the weave. A boat cover with a lighter weight and tighter weave may be more durable than a cover with a heavier weight but a coarser weave.

Fabric Color

Reds and yellows tend to fade the fastest. Blues seem to keep their color the longest. A UV protective coating will make the color last even longer.

Winter Boat Storage Tip #3: Don’t let pockets of rainwater collect on your boat cover.

Don't let rainwater collect on your boat cover.

Support your boat cover with a support frame from a marine store or a homemade PVC boat cover frame. Make sure there are no pockets where rainwater can collect. Put a tuck in the cover or reinforce the frame where necessary. You can even use life jackets or seat cushions to keep the cover from sagging in specific areas.

Winter Boat Storage Tip #2: Brush the snow off your boat cover every time it snows.

Never let the snow build up on your boat cover.

After each snowfall, brush the snow off the boat cover. Make it part of your routine along with clearing the driveway and sidewalks. You can use a push broom to drag the snow off the cover.

Don’t let the snow pile up more than a few inches. The more snow on your boat cover, the heavier it weighs and the more likely it will damage the cover.

Don’t wait for the snow to melt off the cover. If it melts and then freezes again, it will turn into ice, which is even heavier than snow and harder on your cover.

Winter Boat Storage Tip #1: Never cover your boat cover with a tarp or plastic sheet.

Never cover your boat cover with a tarp,
except for temporary protection.

Another reason not to cover the boat cover with a tarp is because tarps are tough to secure tightly enough to keep the wind from lofting the tarp. When the wind catches the tarp, it rubs on the boat cover and wears down the material, leaving thin spots and even holes.

A quality boat cover, on the other hand, is designed for a tight, secure fit. As long as the boat cover is installed correctly, the wind will not be able to tear at or destroy the cover.

The one exception to this rule is if you need to temporarily throw a tarp over the boat cover to protect it for a short period of time, for example, if you are painting the house or doing other home improvement projects near the boat or if you need to protect the boat cover from sap dripping from the trees (although it’s best to avoid parking your boat under trees that are known to drip sap).

DuraShield Lightweight Travel Motorcycle Cover

- C. Brennan

“I have a 1999 BMW K1200LT and the large cover fits it perfectly. It’s able to be pulled down over the saddlebags and mufflers in the back and cover most of the front tire… Construction is very good. The vents built into the cover seem like they would work well if it were outside (My bike is kept in a garage).”

- Tonia L.

“Better quality, less expensive than the previous bike cover that ripped after one year.”

- K. Joy

“The motorcycle cover is excellent quality and fits over the bike comfortably, covering all parts easily. Very good buy for the price.”

- A. Aiken

“Item received as described, fits my Star Venture completely. I’m delighted, would deal with again with pleasure.”

- Kevin H.

Lined Motorcycle Cover Reviews

DuraShield Lined Motorcycle Cover

- Shelakio

“Product arrived early and is better quality than previous covers I have purchased. A little large for my 600cc, but will definitely protect it from the outdoors.”

- M. Recla

Snowmobile covers provide protection against sun, UV rays, rain, snow, and dust.

Nylon tends to absorb small amounts of water, which extends the drying time. DuraShield snowmobile covers are made from polyester, which is non-abrasive to protect your paint. Our covers also include a special lining to protect the windshield from scratches.

A quality snowmobile cover will protect your sled from damaging exposure to sun, UV rays, rain, snow, dust, and other elements. It should also be designed to prevent moisture buildup by allowing moisture to evaporate. Dual access rear vents in the DuraShield snowmobile cover allow moisture to escape from underneath the cover and allow the cover to breathe.

If you plan on trailering your snowmobile at all on an open trailer, make sure the cover is trailerable. A trailerable snowmobile cover is specially designed to withstand the forces of high speed travel. A tie down system secures the cover to your snowmobile, and the thicker material resists rips and tears from exposure to the strong wind effect created as you drive on the highway.

New! Deluxe Trailerable Snowmobile Cover

These premium trailerable covers come in three different sizes (M, L, XL) for one-person, two-person, and touring and work sleds. Our snowmobile covers fit the most popular makes and models, including Polaris, Arctic Cat, Yamaha, and Ski-Doo.

The DuraShield Deluxe Snowmobile Cover is trailerable for protection on the road, and it makes an excellent storage cover in the garage or outdoors. The 600 denier, thick polyester material is weather resistant, UV coated, and heavy duty for superior protection against the elements.

The scratch-proof hood liner protects your windshield, and the dual rear vents prevent moisture damage by allowing the cover to “breathe.” A zippered gas tank access allows you to fill up on the road.

This snowmobile cover comes with a built-in storage bag, a trailer tie down system, and rear safety markings. The snug-fit elastic hem ensures a secure, semi-custom fit, and the double-stitched seams guarantee the quality of construction.

Better yet, the DuraShield Deluxe Trailerable Snowmobile Cover is backed by a best-in-class Five Year Warranty!

Get yours now at DuraShieldCovers.com, starting at only $54.99! Always free shipping.