Travel Motorcycle Cover Reviews

DuraShield Lightweight Travel Motorcycle Cover

- C. Brennan

“I have a 1999 BMW K1200LT and the large cover fits it perfectly. It’s able to be pulled down over the saddlebags and mufflers in the back and cover most of the front tire… Construction is very good. The vents built into the cover seem like they would work well if it were outside (My bike is kept in a garage).”

- Tonia L.

“Better quality, less expensive than the previous bike cover that ripped after one year.”

- K. Joy

“The motorcycle cover is excellent quality and fits over the bike comfortably, covering all parts easily. Very good buy for the price.”

- A. Aiken

“Item received as described, fits my Star Venture completely. I’m delighted, would deal with again with pleasure.”

- Kevin H.

Lined Motorcycle Cover Reviews

DuraShield Lined Motorcycle Cover

- Shelakio

“Product arrived early and is better quality than previous covers I have purchased. A little large for my 600cc, but will definitely protect it from the outdoors.”

- M. Recla

How do I know which size cover will fit my motorcycle?

Use our motorcycle sizing chart to find the right cover for your bike’s make and model. If you have a custom motorcycle cover, contact our customer service (888-263-7028) to see if our covers will work for you.

How do I clean my motorcycle cover?

The safest way to clean our motorcycle covers is to hand wash them with mild soap and warm water. Use a soft brush or sponge to brush away excess dirt and gently clean the cover. Allow the cover to air dry completely before storage or use.

How waterproof are your motorcycle covers?

Our motorcycle covers are designed to repel water and “breathe,” meaning that any condensation or heat vapors that build up underneath the cover are allowed to escape through vents in the material. Keeping the cover clean and free of debris will allow the water repellant coating to work best.

I use my motorcycle cover on road trips. Which cover should I buy?

The DuraShield Travel Motorcycle Cover is great for road trips. It’s a lightweight, compact cover that easily stores on board and keeps your motorcycle clean, safe, and protected, whether overnight or just for a few hours. Use the integrated grommets and a cable lock for extra security. Just stuff the cover in the included mesh storage bag when you’re ready to head out again.

I use my motorcycle cover for storage. Which cover should I buy?

The DuraShield Lined Motorcycle Cover is a luxury cover that pampers your bike during storage. The cover material is thicker for added protection and longer-lasting durability. Plus it’s got a breathable vent system to prevent moisture damage, a heat resistant lower panel that lets you throw the cover over hot pipes, and a “pillow quilt” lining that cocoons your paint and windshield.

I store my motorcycle in the garage. Do I really need a motorcycle cover?

Yes. Dirt and dust are stirred up every time you open or close the garage door. Over time, that dirt and dust will build up on your bike. If you want to keep your bike clean and in prime condition, use a motorcycle cover to protect it from dirt and grime.

How long will my DuraShield motorcycle cover last?

Our motorcycle covers are built to last. They come with a 100% satisfaction guarantee and a 5 year warranty. With the right care (cleaning the cover, keeping it clean, avoiding rips and tears, etc.), your cover will last even longer. Also, your particular climate affects how long the cover will last. The harsher conditions that you expose your cover to, the sooner it may need to be replaced.

Choosing the right size motorcycle cover is important if you want to fully protect your bike from the elements. Follow these steps to make sure the cover you buy is the right size for your bike.

1. Check the Motorcycle Cover Sizing Chart

   

   The bottom of the motorcycle cover should reach within a few inches of the ground.

   Use the motorcycle cover sizing chart as a beginning point to determine which size cover you need. Remember that the suggestions on the sizing chart are just that—suggestions. Even when a cover sizing chart is available, it’s a good idea to double check the dimensions of your bike before purchasing a motorcycle cover.
   a

   Aftermarket accessories and modifications can change the dimensions more than you realize. If your bike has saddle bags, fairings, a backrest, sissy bar and/or a windshield, you will most likely need a larger cover. Make sure you get a motorcycle cover with the right fit to provide the best protection possible.

2. Measure Your Motorcycle

   The cover length, width, and height are stated on the product page for all DuraShield motorcycle covers. For example, the DuraShield Lined Motorcycle Cover in X-Large is 104″ long x 41″ wide x 49″ high. Make sure your bike does not exceed these dimensions, or the cover will be too snug.

3. Err on the Larger Side

   Your motorcycle size may not meet the exact dimensions stated for the cover. If not, just make sure you choose a cover that is slightly larger than your motorcycle (rather than slightly smaller). It’s better to choose a cover that’s a little on the baggy side (but still fits) than a cover that’s too small to cover your bike properly. If you’re afraid the cover might blow away, you can always secure the cover using the integrated grommets.

4. Get the Right Fit

   The bottom of the motorcycle cover should reach within a few inches of the ground. It does not need to touch the ground to fully protect your motorcycle. The extra few inches of clearance will promote air flow underneath the cover.

   If you’re still not sure which size cover is right for you or if you have a custom bike, don’t hesitate to call the customer service line to find the right motorcycle cover for your needs.

Keep your motorcycle cover clean
for the best protection.

Rinse Your Motorcycle Cover Regularly

Rinsing your motorcycle cover once a month with a garden hose will slow down the accumulation of dirt, enhance the protection your cover provides, and cut down on how often you need to “deep clean” your motorcycle cover.
Note: Do not use a pressure washer to hose down your cover.

Hand Wash Your Motorcycle Cover with Mild Soap

Hand washing your motorcycle cover is the safest and gentlest way to clean your cover. Use a solution of mild soap (such as Ivory) and warm water to clean your cover with a sponge or soft brush. Wash both the inside and outside of the cover for the best results.

Harsh soaps or detergents can strip away the protective UV and waterproof coatings. If the soap you use is too harsh, you may need to reapply these coatings with a UV fabric spray and waterproofing spray.

Rinse and Air Dry Your Motorcycle Cover

Rinse the cover thoroughly before letting it dry. Any soap residue left on the cover may compromise its quality. There should be no suds left on the motorcycle cover after you rinse it.

Do not dry the motorcycle cover in a dryer. Allow it to air dry instead. Make sure the cover is completely dry before using it on your motorcycle or folding it for storage.

Keep Your Motorcycle Cover Free From Debris

Brush off leaves, dirt, snow, and debris from the surface of your motorcycle storage cover on a regular basis. Keeping your cover free from debris allows the cover to perform up to the standards it was designed to meet. For the best protection, clean your motorcycle cover on a regular basis.

Protect your motorcycle cover
from UV damage.

Even though your cover is pre-treated with a UV coating, the quality of the UV protection (as with any other motorcycle cover) will fade over time. Just like your motorcycle needs a fresh coat of wax to protect it, your motorcycle cover needs a fresh coat of UV inhibitors to keep your cover fully protected from sun damage.

As the UV coating blocks the UV rays as part of its job, the UV rays slowly break down this protective UV coating. To ensure that your motorcycle cover is blocking as many UV rays as possible, you need to reapply the UV coating on a regular basis.

To prolong the life of your motorcycle cover, we recommend applying a UV-blocking fabric spray to the cover once or twice per year. How often you need to reapply the UV inhibitor depends on how much your cover is exposed to the sun. The more sun exposure your cover gets, the more often you will need to apply a fresh coating of UV-blocking spray.

Some UV fabric protectors may actually harm your bike cover. Never use sprays that contain harsh solvents or additives, such as ScotchGuard. Only use an approved UV fabric spray, such as 303 Fabric Guard.

Lined Motorcycle Cruiser Cover

“I purchased this cover for my 1989 Honda Goldwing (which has 20,000 miles) but was very skeptical as too what I would get for the little money being spent. What I found when I opened the box was a cover of very high quality, flawless workmanship, and quite frankly a cover that I would gladly have paid much more for. This cover is well made with top quality materials and workmanship, is well designed, and the fit up to the motorcycle is excellent.”

- T. Gould

“Amazingly well made, waterproof, and the addition of a cotton interior helps prevent scratches on my antique 1974 Honda 450. Make and sell products like this at a reasonable price, and you’ve got a customer forever.“

- Bob Minnoch

“This is an excellent cover for the money. I have seen other covers at the motorcycle specialty shops with a much higher price. We have a Honda 1500 and ordered a Large Cycle Sack it fits perfect. Unsure of how it would handle in the rain because our bike is garage kept. I would highly recommend this cover. Excellent price. High quality.“

- L. Harrison

Take advantage of our best deals before it’s too late!

1. Motorcycle Engine Guard Chaps for Harley Davidson (FLH and FLS series)

   Sale Price $39.99 (Regular Price $99.99)
   - Constructed with durable, leather sim vinyl
   - Polished snaps
   - Adjustable click-fit straps
   - Bottle holster and storage pocket for on-bike storage

a

2. Spare Tire Cover

   Sale Price $14.99 (Regular Price $27.99)
   - Available for 27-29″ tires or 33-35″ tires
   - Protects the spare tire on your RV, truck, camper, or car
   - Heavy duty, cotton-backed vinyl
   - Double-stitched seams
   - Full elastic bottom hem
   - Arctic white color

FAQs on material thickness for boat covers, jet ski covers, motorcycle covers, ATV covers, and golf cart covers.

What determines the thickness of a cover?

“Denier” is the term used to describe the thickness of a material. The thicker the cover material, the higher the denier.

Are thicker covers better?

Thicker covers are better for outside storage. They’ll stand up better under the wear and tear of rain, snow, sun, and the elements. For inside storage in protected areas, thinner storage covers work just fine.

What is the recommended denier for indoor and outdoor storage covers?

For outdoor storage covers, a thickness of 300-600 denier is generally sufficient. For indoor storage covers, a thickness of 150-300 denier provides adequate protection.

What about breathability?

The thicker a storage cover is, the more difficult it is for air to flow through the cover. Without adequate venting, a thick storage cover will trap condensation inside the cover, possibly resulting in moisture damage. Most manufacturers include a venting system to make a thick cover breathable. The vent allows air and moisture to escape from underneath the cover while preventing moisture from entering.

How much does a quality storage cover cost?

The higher the denier, the more you should expect to pay. If your motorcycle or boat is in a fairly protected area, you may be able to get away with a thinner, lower cost cover. If you store your motorcycle or boat outdoors, invest in a thick, high quality storage cover with vents. It will cost you a little more up front, but the quality of protection will save you money in the long run.

Looking for the best deal on a motorcycle cover? Take a look at the table below for a side-by-side comparison of several of the top motorcycle covers on the market today.

Note: All specifications are based on the manufacturer’s stated price and table description at time of posting.

Read the tag on your boat cover, ATV cover, or motorcycle cover, and you’ll probably see terms like “waterproof,” “water-resistant,” and “water-repellent.” You might think they all mean the same thing, but the truth is that there’s a difference between a waterproof cover and a water-resistant cover.

What’s the difference between all these terms? Here’s how Merriam-Webster online defines it:

Waterproof: “impervious to water; especially : covered or treated with a material (as a solution of rubber) to prevent permeation by water”

Water-repellent (also water-resistant): “treated with a finish that is resistant but not impervious to penetration by water”

Breathable, Waterproof Motorcycle Cover with
"Vent X" Venting System

A waterproof cover, on the other hand, is designed to keep out heavy rains. The seams are taped or sealed to keep water from entering through the tiny needle holes in the fabric seams. Although a waterproof cover sounds like the better of the two types of covers, it does have its weaknesses.

First, the time and effort required to waterproof a cover adds to the overall cost. If you choose a waterproof cover over a water-resistant one, be prepared to shell out the extra change.

Second, because of the water-tight nature of a waterproof cover, any condensation that builds up under the cover stays under the cover and can potentially cause moisture damage to your boat or vehicle. That’s why some manufacturers design their waterproof covers with vents to allow the condensation to evaporate and to prevent moisture damage. A breathable, waterproof cover will fully protect your boat, ATV, or other powersports vehicle from exterior and interior moisture.

Also keep in mind that one boat or motorcycle cover may be more waterproof than another, depending on the quality of the fabric and its resistance to water pressure. According to Wikipedia, “water resistance is measured by the amount of water, in mm, which can be suspended above the fabric before water seeps through.” So the more water pressure that a piece of fabric cover can withstand, the more likely it will be to keep your boat or motorcycle dry in heavy rain or snow.